Router Frontline

Forgot admin password for a motorola ac1900 wifi router and now you don’t remember the admin password? Oh yes, the good thing is that is quite possible to reset and recover the admin password. However, in this article, you will find the step by step procedures that you need to follow if you are in a fix and the admin username and password of your Motorola AC1900 router is forgotten.

Introduction

The admin or root password is crucial to the Motorola WiFi router since it’s the one which enables its owner to change settings of the router and manage the home network. However, it is common to forget this password after some time especially if it was set during initial router setup.

Changing the admin password is easy and this article guides both new and experienced users on how to perform the reset. The process is not invasive and none of your current network settings or connected devices will be removed by the method.After resetting, you can set a new secure admin password and continue managing the router seamlessly.

Hardware Method to Reset Password

The hardware reset method involves accessing the physical router and pressing a button combination to factory reset it. This wipes out all custom configurations including the forgotten admin password and resets it to the default.

Here are the steps:

Materials Required:

• Motorola AC1900 wifi router
• Paperclip or pin
• Computer connected to the router network

Steps:

1. Locate the small reset button on the rear or side panel of the router. It is usually recessed to prevent accidental presses.
2. Use a straightened paperclip or pin to gently press and hold the reset button for about 10 seconds.
3. The power light on the front will start flashing, indicating the router is resetting to factory defaults.
4. Once the reset is complete, the light will stop flashing. This process wipes all custom settings like the admin password.
5. By default, the admin username is ‘admin’ and password is the last 6 digits of the wireless router’s MAC address printed on the bottom. You can find the MAC address in the router’s documentation as well.
6. Open a web browser on your computer and type the router’s default IP address 192.168.1.1 to log into the administration page.
7. You will now be able to access the dashboard and change the admin password to a new one of your choice.

The hardware reset is a simple and effective way to recover access when all else fails. Just be aware it erases all settings to factory default.

Software Method to Reset Password

A software reset does not require physically accessing the router. It can be done remotely from any internet-connected computer on the same network as the router.

Here are the steps:

Materials Required:

• Motorola AC1900 wifi router
• Computer on the same network as the router

Steps:

1. On your computer, open a web browser and type the router’s default IP address 192.168.1.1
2. If prompted for a username and password, use the default credentials mentioned earlier.
3. From the dashboard menu, look for and click on the ‘Admin’ or ‘System’ tab.
4. Select the ‘Backup/Reset’ or ‘Firmware Upgrade’ sub-menu option.
5. Click the ‘Reset’ or ‘Restore’ button and select the ‘Restore to factory default settings’ option.
6. Confirm by clicking ‘OK’ when prompted to reset the router.
7. The router will now reboot and reset all settings to factory defaults, including the admin password.
8. Use the default username and generated password to log back into the router admin page at 192.168.1.1
9. Once logged in, change the admin password to your new preferred password.

This software reset process avoids physically accessing the router. Just make sure to back up any customized settings beforehand as they will be lost during the reset.

Hardware Vs Software Password Reset – Comparison

While both methods forgot admin password for a motorola ac1900 wifi router effectively recover the admin password, there are some key differences:

Hardware Reset	Software Reset
Requires physically accessing the router	Can be done remotely from any device on the network
Faster process; complete in under a minute	Slightly longer process as it involves web interactions
Wipes all settings including customizations	Backups/restore options allow saving customized settings
Safer method preventing unauthorized access	Risk of someone else initiating reset remotely
Best when network access is lost	Preferred when router is installed in difficult spot

In summary:

• Hardware reset is quicker if you have physical access to the router.
• Software reset is convenient when router is installed in a hard-to-reach place.
• Software method retains customized settings if backed up, hardware wipe is complete.
• Consider physical security and unauthorized access risks with software method.

So based on your router location and needs, choose the best reset option. Just be sure to note the new default password set after resetting.

Why Do Passwords Get Forgotten?

There are a few common reasons why people tend to forget their router admin passwords:

• It was set during initial setup long back: If the password was configured during the initial router installation process which could be months or years back, it is easy to forget over time.
• Default password was never changed: Some people skip changing the default admin password which comes preconfigured on the router. These passwords are easy targets for hackers.
• Password wasn’t written down securely: Passwords should always be stored securely instead of casually jotting it down. Jotting down increases the chances of it being misplaced or seen by others.
• Multiple devices and passwords to manage: With the proliferation of devices and online accounts needing passwords, it is easy to mix one password with another.
• Admin access rarely needed post setup: Unless settings are changed frequently, people tend to forget passwords which are not used regularly post initial router setup.

No matter what the cause, resetting is the easiest solution to regain admin access to the Motorola router when the password is lost. Let’s look at the reset process.

How to Reset Admin Password on Motorola AC1900 Router

Resetting the admin password on the Motorola AC1900 router is easy to do and requires only physical access to the router. Here are the step-by-step instructions:

Step 1: Locate the Reset Button

The reset button is located on the rear panel of the Motorola AC1900 router. It is usually a small push button behind a hole on the casing.

Step 2: Use a Paperclip to Press the Reset Button

Use a bend paperclip or thin object to press and hold the reset button for about 10 seconds.

Step 3: Release the Button When Router Reboots

The wireless router will reboot automatically. You can now release the reset button.

Step 4: Connect to Router IP Address in Web Browser

By default, the router IP address is https://192.168.1.1. Open a web browser and type the IP address.

Step 5: Log in to Setup Wizard Without Password

The setup wizard screen will open up. Since the router has been reset, no login password is needed at this stage.

Step 6: Complete Setup and Set a New Password

Follow the on-screen instructions to complete basic setup. At the password screen, assign a new custom admin username and password.

Step 7: Make a Note of the New Password

Be sure to make a note of the new password in a secure location so it is not forgotten again. You can now login to the router web interface with the new credentials.

That’s it – within few minutes, you would have successfully reset and recovered the admin username and password for the Motorola AC1900 router. The steps are simple and avoid the hassle of contacting technical support.

Subheadings

Locating the Reset Button

As mentioned earlier, the reset button is typically located at the back of the router. On the Motorola AC1900, it is a very small hole that requires using a pointed non-conductive object like a straightened paperclip to press. Make sure you are pressing the correct button size of a pinhole.

Resetting Process

When the reset button is pressed for 10 seconds, the LED lights on the router may start blinking continuously. Once it stops blinking after around 30 seconds, you can release the button. The router will now restart with factory default settings. Allow it 1-2 minutes to fully reboot before accessing the default IP address in the browser.

Completing Basic Setup

After logging in without a password on the setup page, you need to run through basic steps like language, time zone, WiFi network name and password. Review and confirm all selections carefully. When it prompts for admin username and password, this is where you set a new custom login credentials.

Benefits of Resetting

Resetting restores full functionality and control to the router dashboard. You avoid headaches of contact support or hardware replacement. No configuration settings are lost in this process. Connected devices remain paired with the network while only the admin password changes. Children can continue using internet with the same filtered access levels.

Common FAQs

Q. What is the default IP for router login?

A: The default IP address for the Motorola AC1900 is 192.168.1.1. You can access the web interface by typing this IP in the browser address bar.

Q. Will resetting delete my WiFi settings and passwords?

A: No, resetting only changes the password required to access the router admin page. All your WiFi network name (SSID), password and connected devices remain unchanged.

Q. How do I prevent forgetting the new password?

A: Write down the new password securely either electronically or on paper and store it in a safe place known only to you. You can also leverage a password manager.

Q. What if I’m unable to access the reset button?

A: If the reset button hole is not accessible, as a last resort you can also try to contact Motorola technical support for hardware level reset options after verifying your router model details.

Conclusion

Losing the forgot admin password for a motorola ac1900 wifi router can be frustrating but as we saw, regaining access on the Motorola AC1900 is quite straightforward. By locating the small reset button and pressing it for 10 seconds, you can easily sign in without any password during initial setup. Take some time to configure a new strong password that is securely written down. Going forward, avoid forgetting it to maintain control of your network settings. With the simple steps outlined, you can get back into your router in minutes when passwords are forgotten.